su3 A320 NEO v2 - fuel loading via Inibuilds EFB limited to 12.4 tons. No center tank fuelling possible.

[Supera380]

Hi,

Just reporting another issue this time in trying to fly from VABB to WMKK. MSFS2024, SU3.

It's a 5 hour flight requiring 13.9 tons of fuel however if you try and enter the ZFW and Fuel load into the Inibuilds EFB, the ZFW loads correctly into the aircraft  however the centre tank briefly loads with fuel as shown on the ECAM but is zeroed out again shortly afterwards (after 1-2 secs)  meaning you can not fly with the full amount of fuel in the A320 NEO when trying to do more than 4hr flights (depending upon pax load of course)!

Example: Enter the following values into the Inibuilds EFB then click Apply Load.

ZFW=61284kg

Fuel=13879kg

Instead, the fuel is limited to only the wing tanks being filled in the actual aircraft  and a max of 12,420kg of fuel is shown on the ECAM.

On the ECAM, the centre tank initially shows a value briefly after loading, but after 1-2 secs, the centre tank shows 0 kg of fuel.
Any value below 12.4 tons of total fuel works OK. Any value above this which relies upon centre tanks to be filled does not work.

Please Inibuilds can you please fix this as this significantly impacts trying to do longer flights in the A320 NEO !!!
Apparently this is being seen in SU4 too!

Thanks,
Mark