Step Climb issue!

[noizytg]

Such as long-haul flights with many step climbs already programmed on ground before departure. 
In flight, when i edited the step climb points to be earlier or later. FMS accepted them. But when approaching the stepping WPT.
No "STEP AHEAD" MSG Shown and lead to auto step climb function does not do as planned which resulted in not enough fuel to destination airport.
I tried many times, it seems that if no step climb point editing the step ahead advisory work fine and also auto stem climb do the job.
but whenever edited it no longer works.

Pls address this. Thank you very much.

Edited July 27 by noizytg

[Xenon341]

Hello,

Something weird on your pictures.
The step alts screen shot that your CRZ level is 350, so the first step climb is not one and might be ignored.

Can you show the flight plan near PUTER so we can see of a S/C waypoint is added ?

[noizytg]

4 minutes ago, Xenon341 said:

Hello,

Something weird on your pictures.
The step alts screen shot that your CRZ level is 350, so the first step climb is not one and might be ignored.

Can you show the flight plan near PUTER so we can see of a S/C waypoint is added ?

Thank you for the point. it seems that in PERF CRZ, somethings adjusted the CRZ FL field to FL350 despite i'm cruising at FL330.
I might try to enter current FL in this field to confirm actual FL, and it might resume normal advisory to climb. I'll try it.

[noizytg]

I already tried it and no luck. it seems to be buggy. After edited CRZ FL370, Plan STEP @ TASOT/390 There is no STEP CLIMB pseudo upward symbol at TASOT as it should have had and when approaching TASOT no STEP AHEAD message and no auto step climb. The STEP DELETED just came on when passing this WPT. The weirdest is all STEP CLB WPT have disappeared despite of only that passed WPT.

Edited July 27 by noizytg

[abcg]

Your VOR is also faulty, 1.1.2c, right? It seems that everyone's VOR is faulty under Navigraph data.

[Xenon341]

Yes I have the same VOR that doesn’t display anything on the ND.

Back to OP problem, are you auto importing step climbs or is it manually entered ?

What happen if you add a 3rd one ? Do you see it in the fplan ?

I use step climb every time and had not have the problem so far

[noizytg]

3 hours ago, Xenon341 said:

Yes I have the same VOR that doesn’t display anything on the ND.

Back to OP problem, are you auto importing step climbs or is it manually entered ?

What happen if you add a 3rd one ? Do you see it in the fplan ?

I use step climb every time and had not have the problem so far

I added them manually 4 step climb points. The first step climb went well with pseudo + warning + auto step climbing to. but after edit the 2point to climb earlier.
The problem came as i said no step climb advisory and pseudo as well as 3 remaining step climb points disappeared from FMS.