Anspiran Posted July 18 Posted July 18 (edited) Hello Inibuilds, the Aircraft works way better than expected. Major Airports like EGLL, EDDF/M and so on, result in a typical crash. However sometimes the plane gives up and goes black screenish. Biggest issue I found so far: When switchting from exterior view back inside, the OIS and Center Screen create an epileptic seizure. Sometimes while Taxi, nose tiller cant be move to one side. I don’t know how to Replicate the Problem. I use Rudder inputs, to Control the Aircraft. Question: Is it possible to Inlay a picture of a Cabin inside the Windows, so we have a decent view from the Outside? Thanks for the work, hopin on steady improvements and have a great weekend. Edit: After capturing ILS in HECA and then disconnecting AP and AP Thrust for manual flight, Aircraft didnt respond to throttle, Spoilers or break inputs. Edit2: Nav Database is shown incorrect. Shows Jan-Dec, even after Navdata Upgrade from Navigraph. Sometimes Company Flight-Plan cant be recieved on Init Page Edit3: Plane Controlls and Interfaces/MFD‘s Crash while cruising. Plane becomes unresponsive to Inputs, but keeps flying. Edited July 19 by Anspiran 3
Bassclm1 Posted July 19 Posted July 19 I have the same problem. CTDs in those airports . Ext view and going back onto the cockpit all my instruments have an epileptic fit . Screens flashing like a 90s rave ! 2
CptPaul Posted July 19 Posted July 19 Agree to all above. Really great work though considering how temperamental and volatile MSFS2024 is.
....errera Posted Sunday at 12:02 PM Posted Sunday at 12:02 PM Hello everyone, I'm having a problem with the OIS saying "OIS not available." I'd like to know if you have this problem or if you have a solution. Thanks in advance.
CptPaul Posted Monday at 12:19 AM Posted Monday at 12:19 AM 12 hours ago, ....errera said: Hello everyone, I'm having a problem with the OIS saying "OIS not available." I'd like to know if you have this problem or if you have a solution. Thanks in advance. You have to wait for about 7-8 minutes for it to boot up (if set to realistic mode).
Jack Dudley Posted Monday at 06:16 AM Posted Monday at 06:16 AM On 7/18/2025 at 8:21 PM, Anspiran said: Hello Inibuilds, the Aircraft works way better than expected. Major Airports like EGLL, EDDF/M and so on, result in a typical crash. However sometimes the plane gives up and goes black screenish. Biggest issue I found so far: When switchting from exterior view back inside, the OIS and Center Screen create an epileptic seizure. Sometimes while Taxi, nose tiller cant be move to one side. I don’t know how to Replicate the Problem. I use Rudder inputs, to Control the Aircraft. Question: Is it possible to Inlay a picture of a Cabin inside the Windows, so we have a decent view from the Outside? Thanks for the work, hopin on steady improvements and have a great weekend. Edit: After capturing ILS in HECA and then disconnecting AP and AP Thrust for manual flight, Aircraft didnt respond to throttle, Spoilers or break inputs. Edit2: Nav Database is shown incorrect. Shows Jan-Dec, even after Navdata Upgrade from Navigraph. Sometimes Company Flight-Plan cant be recieved on Init Page Edit3: Plane Controlls and Interfaces/MFD‘s Crash while cruising. Plane becomes unresponsive to Inputs, but keeps flying. Ensure ‘Rudder control tiller’ is set to On.
Anspiran Posted Monday at 01:22 PM Author Posted Monday at 01:22 PM Hey thanks, it is on. It sometimes doesnt respond, as perviously mentioned 🙂 1
tunapoptart Posted Tuesday at 12:58 AM Posted Tuesday at 12:58 AM 11 hours ago, Anspiran said: Hey thanks, it is on. It sometimes doesnt respond, as perviously mentioned 🙂 Can second this, the rudder will frequently stop responding even with settings set to on. 1
karlos1010 Posted Tuesday at 12:10 PM Posted Tuesday at 12:10 PM Hi all, I just wanted to mention another bug that had not been reported until now, which is that the AMDB appears in black and does not work (rest of Navigraph's functions work correctly). I don't know if it is not enabled for the Xbox version.
Eddie Posted Wednesday at 03:13 PM Posted Wednesday at 03:13 PM Hello, For anyone having the rudder issue, please ensure you have no other conflicting bindings that are either "resetting" the rudder or counteracting it. Please tag me once you have looked into this. @karlos1010 That option is disabled for Xbox, unfortunately. Thank you 🙂 EddieCommunity Manager IniBuilds Ltd. | inibuilds.com
Anspiran Posted Thursday at 01:20 PM Author Posted Thursday at 01:20 PM Hello Eddie @Eddie, for me, there is no conflicting binding. Also Keyboard Input with ctrl is not working.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now