MSFS (2020) Issues

[tclayton2k]

Here are some issues I've run into after my first flight:

I can't find way to hide the tablet without hiding the pilot's yoke.

Spray and observation controls are present on every panel version I've seen so far - including passenger and cargo.

When you hit the starters, the RPM rushes to 51% and then holds there rather abruptly before you ever introduce fuel. After fuel is flowing, there’s no change. Judging by every other PT6 in this sim, I’m pretty sure that’s not realistic.

If I run the PMS GTN650, the system starts out with the CDI running on Nav1 and there’s no way I can find to change that. If I change to the Asobo gauge (the tablet still says it’s a GTN650???), I now have a CDI button, but the gauge never changes from saying it’s on GPS, even though clicking it does have an effect on the gauges.

Lights… The Anti-Collision and Recognition Light switches do nothing that I can see. There’s no switch marked Strobe, but pressing whatever key you have bound to that function activates the wingtip strobes.

Oh, and I posted this here since there's no topic for this plane in the 2020 section.

Edited Sunday at 12:51 AM by tclayton2k

[tclayton2k]

Update - I've been pointed to the way to change the CDI in the PMS gauge.

[tclayton2k]

Second update - I found the button on the yoke that hides the tablet.

[dresoccer4]

where is the clickspot to hide the yoke?

[tclayton2k]

The area in yellow is the yoke clickspot, and the red arrow points to the tablet hider.