First purchase in FS2024 only, cannot start battery...

[YS0430]

Hi there I've just purchased the A350, using 1.0.12, I can select the aircraft, can load into airport, walk around removed the engine cover, pitot tube cover and open the GPU door, but somehow I just cannot start the battery and no system have any response so I could try to load into the first calibration, anyone have idea????

[YS0430]

edit: I looked through discussions about WASM issues, and when I go into the WASM folder, I find that although my load time is quick even on first load in free flight, the WASM folder only generated an empty works sub folder, and nothing else inside the WASM\inibuilds-aircraft-a350 folder... any idea?

[Xenon341]

Yeah the WASM compilation failed.
Try deleting the a350 folder inside the WASM folder and reload a flight.

It should take a few minutes to compile and let you fly. 

[Farlis]

4 hours ago, Xenon341 said:

a few minutes

Depending on your system up to 20 Minutes.

[YS0430]

7 hours ago, Xenon341 said:

Yeah the WASM compilation failed.
Try deleting the a350 folder inside the WASM folder and reload a flight.

It should take a few minutes to compile and let you fly. 

Tried a dozen times, tried the cathay (official inimanager livery) -1000 varient with duplicated control for the stick and throttle for Fenix A320 and start flight, dead plane, external walk around points mostly usable, internal knobs can turn and button have visual clicks, clicking the GPU port externally lights up the ext power light but batteries button have no response

 

removed the WASM A350 folder, restart on runway in default LXGB, it loaded for <1min, get into the "Start flight" button, nothing worked, only sound, engine not spooling, cockpit door cannot open, only flaps lever and parking brake moves with the TM TCA quadrant, sidestick, rudder etc. stays still

Tried a few more times with the default ini builds livery, the -900 varient and even wait with that nothing works state for 30min and still nothing happens. So frustrated for a $81 product, paid the cash, hope for some calibration and good to go, and nothing works.....

Tried loading the default in game (I am using MS store) ini A310 and A330, A321, all worked flawlessly, just this A350 don't work at all

[haza2]

2 hours ago, YS0430 said:

Tried a dozen times, tried the cathay (official inimanager livery) -1000 varient with duplicated control for the stick and throttle for Fenix A320 and start flight, dead plane, external walk around points mostly usable, internal knobs can turn and button have visual clicks, clicking the GPU port externally lights up the ext power light but batteries button have no response

 

removed the WASM A350 folder, restart on runway in default LXGB, it loaded for <1min, get into the "Start flight" button, nothing worked, only sound, engine not spooling, cockpit door cannot open, only flaps lever and parking brake moves with the TM TCA quadrant, sidestick, rudder etc. stays still

Tried a few more times with the default ini builds livery, the -900 varient and even wait with that nothing works state for 30min and still nothing happens. So frustrated for a $81 product, paid the cash, hope for some calibration and good to go, and nothing works.....

Tried loading the default in game (I am using MS store) ini A310 and A330, A321, all worked flawlessly, just this A350 don't work at all

Please could you post a video of your process, that would be great. Thank you 

 

[YS0430]

This is one of the trial, started on kai tak runway and nothing pops up

 

https://onedrive.live.com/?qt=allmyphotos&photosData=%2Fshare%2F2F6E8D2F5B2E1608!sbe6669f1f03b42e0bbcd01ac4a26f2fd%3Fithint%3Dvideo%26migratedtospo%3Dtrue&sw=bypassConfig&cid=2F6E8D2F5B2E1608&id=2F6E8D2F5B2E1608!sbe6669f1f03b42e0bbcd01ac4a26f2fd&redeem=aHR0cHM6Ly8xZHJ2Lm1zL3YvYy8yZjZlOGQyZjViMmUxNjA4L0VmRnBacjQ3OE9CQ3U4MEJyRW9tOHYwQjM5b1RvaHZQWUdPZmxaN3pzbkp6RXc&v=photos

[Xenon341]

And maybe try to uninstall via inimanger then start and close the sim then and install again, you clearly have a problem ^^

[haza2]

6 hours ago, YS0430 said:

This is one of the trial, started on kai tak runway and nothing pops up

 

https://onedrive.live.com/?qt=allmyphotos&photosData=%2Fshare%2F2F6E8D2F5B2E1608!sbe6669f1f03b42e0bbcd01ac4a26f2fd%3Fithint%3Dvideo%26migratedtospo%3Dtrue&sw=bypassConfig&cid=2F6E8D2F5B2E1608&id=2F6E8D2F5B2E1608!sbe6669f1f03b42e0bbcd01ac4a26f2fd&redeem=aHR0cHM6Ly8xZHJ2Lm1zL3YvYy8yZjZlOGQyZjViMmUxNjA4L0VmRnBacjQ3OE9CQ3U4MEJyRW9tOHYwQjM5b1RvaHZQWUdPZmxaN3pzbkp6RXc&v=photos

Hello, did you follow this to clear your WASM folder? 

[YS0430]

1 hour ago, haza2 said:

Hello, did you follow this to clear your WASM folder? 

Yes, tried at least half a dozen times... it just don't work

[YS0430]

Tried another night and even delete the whole community folder and only leaving in the ini A350 and still, nothing worked... same quick load on to runway but it just stuck with no buttons working, ironically I can use the other in game ini A320, fenix A320, FBW A380 all fine

[YS0430]

Just out of curiousity, for the "first load could take up to 20min", does that mean even if I load to the "ready to fly" tab appears (which never exceed 30 sec in my case...) I cannot press the ready to fly button and need to say, in a spawn on runway situation wait till the engine blades turn??? also can I switch to another window to let it complie the WASM in background (e.g. watch some youtube) or need to wait the sim to load 20min at least before doing something?

[foliainfx]

16 minutes ago, YS0430 said:

Just out of curiousity, for the "first load could take up to 20min", does that mean even if I load to the "ready to fly" tab appears (which never exceed 30 sec in my case...) I cannot press the ready to fly button and need to say, in a spawn on runway situation wait till the engine blades turn??? also can I switch to another window to let it complie the WASM in background (e.g. watch some youtube) or need to wait the sim to load 20min at least before doing something?

The first load after an update/install will be WASM compiling, this will take quite a lot of time compared to other loads. While this compiles you can switch to other tabs just fine. The time varies, it's 10-15 minutes roughly on average.

Edited 12 hours ago by foliainfx

[YS0430]

20 minutes ago, foliainfx said:

The first load after an update/install will be WASM compiling, this will take quite a lot of time compared to other loads. While this compiles you can switch to other tabs just fine. The time varies, it's 10-15 minutes roughly on average.

If so I really think I've wasted $80 at the meantime and have no way to solve it, tried a few dozen times and the problem is that the first load after any re-installation the WASM compile time (assume it's the time where pressing start flight and the circle spins on the big map) is 100% within 30 sec and then nothing is complied, all sidestick, throttle just don't respond and no screen/battery not working at all.... tried the -900, -1000, fresh install, nothing really make it work..

[YS0430]

 

here is a sample video starting when I choose the airport to start (LXGB) and shows what it happens, you can see the initial load just took like 15 sec. the WASM folder have no files, only a works folder inside the A350 folder afterwards

[Xenon341]

You can contact direct support through the ini manager, considering your problem it could be better.

[foliainfx]

1 hour ago, YS0430 said:

If so I really think I've wasted $80 at the meantime and have no way to solve it, tried a few dozen times and the problem is that the first load after any re-installation the WASM compile time (assume it's the time where pressing start flight and the circle spins on the big map) is 100% within 30 sec and then nothing is complied, all sidestick, throttle just don't respond and no screen/battery not working at all.... tried the -900, -1000, fresh install, nothing really make it work..

Try doing a full deinstall, with all files deleted and then reinstalling.

[YS0430]

8 hours ago, Xenon341 said:

You can contact direct support through the ini manager, considering your problem it could be better.

Trying to do so and they are silent since I sent the sample video, hopefully they are investigating.