Cockpit Mask Modeling Issue

[Hitachi]

When I superimposed it over the actual photo, the lines still seem too thick.

Of course, there may be a margin of error since the photos were not taken from the same angle or at the same focal length, but the inibuilds A350's face seems to be far from the actual A350's atmosphere.
Could you please review the modeling and textures around the face?

 

 

 

 

[Hitachi]

Is this issue included in the fix list?
I recently went to the airport again and took more photos of the A350, and I still feel that there is something off about the cockpit windows on the iniBuilds A350.

I've created a new comparison video. Even when accounting for differences in focal length, the black paint around the cockpit windows clearly appears too wide compared to the real aircraft.
Please consider correcting this.

[Hitachi]

Is this feedback just being ignored?
The odd-looking cockpit windows were already pointed out in promotional videos before the product was even released, so it’s clearly a mistake. In other words, I’m not the only one who noticed something was off.

comment1

comment2

After reviewing the footage again, the size of the nose gear doors and the cabin windows also seems to be incorrect—but let’s just say that’s due to focal length differences and leave it at that, haha.

[Eddie]

Hello,

Apologies, seems we missed this thread. 
The feedback itself hasn't been ignored no, we've received similar reports and have logged them. I cannot confirm whether or not this is something we'll fully action but it is logged. Refinements will be made wherever necessary.

Thank you for the effort! 

[Hitachi]

I’d like to clarify how much the black area needs to be reduced.

Currently, on the iniBuilds A350, the black paint extends far beyond the outer edge of the cylindrical object located just below the cockpit front windows. Please narrow it so that it aligns with the edge of that cylinder.

On the real A350, the black paint only reaches up to the surface corresponding to the outer edge of that cylindrical object. So, the area needs to be significantly reduced.

I’m not sure if this correction will fully resolve the sense of facial imbalance present on the iniBuilds A350, but I would appreciate it if you could make this adjustment as soon as possible.

I created this text using a translation. It may be difficult to understand, but please also take a look at the attached image.