1.0.6 animation frozen

[Approach118]

It's interesting that before version 1.0.6, I had never encountered animation frozen. 🙂

Due to disk space issues, I installed a new SSD and reinstalled MSFS2024 and ini350 (1.0.6) to the new SSD yesterday.

Then playing it 4 times, I encountered animation frozen twice. 😂

Have you encountered this problem again in version 1.0.6? Is the solution still to delete WASM?😵‍💫

 

[haza2]

22 hours ago, Approach118 said:

It's interesting that before version 1.0.6, I had never encountered animation frozen. 🙂

Due to disk space issues, I installed a new SSD and reinstalled MSFS2024 and ini350 (1.0.6) to the new SSD yesterday.

Then playing it 4 times, I encountered animation frozen twice. 😂

Have you encountered this problem again in version 1.0.6? Is the solution still to delete WASM?😵‍💫

 

Sorry to hear that, could you describe what is freezing please? What systems. Thank you

[ThatOneAirlinerFan]

the entire sim freezes

[Approach118]

30 minutes ago, haza2 said:

Sorry to hear that, could you describe what is freezing please? What systems. Thank you

PC：win 11--Game: MSFS2024 (Steam) SU2 -- Flight: A350 （1.0.6）

A few days ago, play a long-distance flight and usually came to land in the early morning. I found that the plane was moving normally, but all the displays in the cockpit were stuck, such as ND, knobs, etc

 

[haza2]

15 minutes ago, Approach118 said:

PC：win 11--Game: MSFS2024 (Steam) SU2 -- Flight: A350 （1.0.6）

A few days ago, play a long-distance flight and usually came to land in the early morning. I found that the plane was moving normally, but all the displays in the cockpit were stuck, such as ND, knobs, etc

 

Afraid that sounds like a WASM issue. Please could you follow this link if it happens again. 

 

[Approach118]

Just now, haza2 said:

Afraid that sounds like a WASM issue. Please could you follow this link if it happens again. 

 

OK,thank you . 

By the way，do you know that there are currently very few models that support 2024, so I have high expectations for the 350.

I think the throttle and pitch control of the 350 during ILS approach are not stability enough. Do you plan to improve it?

[haza2]

9 minutes ago, Approach118 said:

OK,thank you . 

By the way，do you know that there are currently very few models that support 2024, so I have high expectations for the 350.

I think the throttle and pitch control of the 350 during ILS approach are not stability enough. Do you plan to improve it?

This is a good watch and will answer some questions.

 

[Approach118]

30 minutes ago, haza2 said:

This is a good watch and will answer some questions.

 

Sorry, maybe I didn't make myself clear. The instability mentioned earlier occurred before disconnecting the AP during the approach process.

For example, between 1500 feet to 500 feet, the AP is connecting, but due to the constant changes in wind speed and direction, the throttle will fluctuate rapidly and the rang of the action is extremely large,  the descent rate will also change rapidly, even from -1200 feet to -500 feet within 1 to 2 seconds.

At present, I can only manually fix this issue by disconnecting the AP in advance.

（I guess it's because of the unstable speed. According to common sense, the speed should only be corrected by the throttle? Isn't it adjusting the pitch angle?）

[Approach118]

14 hours ago, haza2 said:

Afraid that sounds like a WASM issue. Please could you follow this link if it happens again. 

 

Very unlucky, what was just said yesterday has happened again.

When preparing to land this morning, I found the plane hovering in the air at a distance of 1200nm from RPLL,

and most of the function keys were malfunctioning. The knobs did not respond.

Specific route information: YBBN flying to RPLL (BIXAD2 BIXAD Q67 BARIA V308 CS B473 LAIYA LAIY7R, from simbrief)

[haza2]

53 minutes ago, Approach118 said:

Very unlucky, what was just said yesterday has happened again.

When preparing to land this morning, I found the plane hovering in the air at a distance of 1200nm from RPLL,

and most of the function keys were malfunctioning. The knobs did not respond.

Specific route information: YBBN flying to RPLL (BIXAD2 BIXAD Q67 BARIA V308 CS B473 LAIYA LAIY7R, from simbrief)

Thank you, will send your valuable feedback to the team.

[haza2]

1 hour ago, Approach118 said:

Very unlucky, what was just said yesterday has happened again.

When preparing to land this morning, I found the plane hovering in the air at a distance of 1200nm from RPLL,

and most of the function keys were malfunctioning. The knobs did not respond.

Specific route information: YBBN flying to RPLL (BIXAD2 BIXAD Q67 BARIA V308 CS B473 LAIYA LAIY7R, from simbrief)

Did you have any further info from the error. In particular we are after a line which says "xxx has caused an exception in XXXX..."

[Approach118]

1 minute ago, haza2 said:

Did you have any further info from the error. In particular we are after a line which says "xxx has caused an exception in XXXX..."

Where can I find more information?

[haza2]

10 minutes ago, Approach118 said:

Where can I find more information?

Same place as the warnings. It is showing 0 errors. We would need the error codes. I have fed the information back to the team. If you pick an error up on your next flight please let us know. Thank you.