A350 Autopilot disconnect Issue MSFS24 only

[Peter]

After the update ( 1.5) when i press the autopilot dico TWICE on my joystick, it will give me a red warning on the ecam that it has diconnected. the second click is suppose to aviod this from happening. it does NOT happen in the 20 version. 

I noticed  " kip on the ground" streamer also had the same problem on his appraoch as well. 

[phantom701]

Yes, I experienced the same problem as well and it is very repeatable. 

Before installing the update in MSFS24, I even cleared out the WASM folder. 

To the inibuilds team, can you also look into the exterior lights during day time? You cannot see them at all... 

[Powie]

Its the same in 2020 

[Matteo Spacca]

Same here

[sunake]

On 3/23/2025 at 3:46 PM, Peter said:

After the update ( 1.5) when i press the autopilot dico TWICE on my joystick, it will give me a red warning on the ecam that it has diconnected. the second click is suppose to aviod this from happening. it does NOT happen in the 20 version. 

I noticed  " kip on the ground" streamer also had the same problem on his appraoch as well. 

Forgive me, I'm new to the A350 but did Airbus change the behaviour for modern airplanes? From what I know a single click of the side stick button will disconnect, and play the "calvary" chime for at least 3 times. Pressing the button a second time is supposed to cancel the calvary chime. 

 

So are you saying now that modern airbus will always play the calvary and then master warning CRC with a red AP message if the side stick button isn't pressed a second time? 

 

Anyway I can agree with you that it worked better before the 1.0.5 update. I find that when I disconnect the AP I have to mash the disconnect button multiple times to avoid the master warning. I posted about it in my own topic but it wasn't acknowledged by anyone. 

[haza2]

2 hours ago, sunake said:

Forgive me, I'm new to the A350 but did Airbus change the behaviour for modern airplanes? From what I know a single click of the side stick button will disconnect, and play the "calvary" chime for at least 3 times. Pressing the button a second time is supposed to cancel the calvary chime. 

 

So are you saying now that modern airbus will always play the calvary and then master warning CRC with a red AP message if the side stick button isn't pressed a second time? 

 

Anyway I can agree with you that it worked better before the 1.0.5 update. I find that when I disconnect the AP I have to mash the disconnect button multiple times to avoid the master warning. I posted about it in my own topic but it wasn't acknowledged by anyone. 

 

On 3/23/2025 at 8:46 PM, Peter said:

After the update ( 1.5) when i press the autopilot dico TWICE on my joystick, it will give me a red warning on the ecam that it has diconnected. the second click is suppose to aviod this from happening. it does NOT happen in the 20 version. 

I noticed  " kip on the ground" streamer also had the same problem on his appraoch as well. 

Thank you, will send onto the team.

 

[Anatoly]

Same here.

[zeni65]

Same on 2020. Except for me a single click of A/P disconnect takes it straight to master warn---no cavalry charge, just master warning tone & ECAM

autoflt AP off

Pressing A/P disconnect again does nothing. 

Edited Friday at 06:13 PM by zeni65

[Matteo Spacca]

Any update on this?
Issue still persists after 1.0.6 update

Matteo

[Germano]

Installed 1.0.6 version, the  issue still present.

When I disconnect the Ap from the JOY I'm getting the error.