A350-1000 THROTTLE NOT WORKING ON THE GROUND

[Jpfc]

By whatever reason the throttle is not working on A350 on the ground, after pushed back and ready to taxi, when applying throttle the aircraft is not moving, I've checked the correct settings but is not working. on the A320 no issues, and on the A350 in the air no issues also, not sure where to go from here, any help would be greatly appreciated.

Jp

[xe_operator]

When you go to the calibration screen in the 350, does it see any throttle movements?

[Jpfc]

Thanks for replying X. Yes, I actually set it on the tablet all visible. 

[xe_operator]

So you see your throttle movement on the tablet and set your throttle positions for idle, climb, flex, and toga but the throttle still aren't working for you on the ground?

[Jpfc]

Hi X, I must apologize, this might be because English is not my main language, The throttles are working but the Aircraft are not moving while at the ground, I've check the brake bindings and there isn't any conflict. I did a quick flight to make sure in the air the throttles work and they were responsive. So I'm loosing my hope on this.

 

[xe_operator]

No worries. Did you make sure to remove the chocks? Without doing so will prevent the aircraft from moving on the ground.

[Jpfc]

Yes I did remove them, I've tried deleting the aircraft cash again, re calibrate the throttles make sure process was followed, another attempt and frustration again, it's annoying me as with the A320 Loaded I have no issues

 

[pizzamonster]

I have same problem. After taxi throttle disconected. I'm using TCA Thrustmaster Capitan Pack. When this happened I checked my settings in sim menu and throttle are working. I checked calibration in Windows menu - everythink is working. But not in A350. My throttle freeze. No movement also in the EFB calibration. When I restarted fly everythink working again till after taxi I move airplane to the runway 😞

[Khalil Ibrahim]

happens to me. I lose throttle & side stick upon push back most of the time, and the times it doesn't, the aircraft's screens would freeze in the air! 

[haza2]

Will report back. Thank you guys.

 

[Jpfc]

Just tried a few things and I believe the Issue is with the GSX integration, as soon as I removed it from the community folder the aircraft works okay at the ground. Tomorrow I'll do a few more tests and I'll be sure. Thann to solve it it's another story, but at least I'm not cut after push back 😀