Display types gets swapped when specified by airframe after 1.0.1 update

[Messttr]

After the 1.0.1 update, the display type appears reversed compared to the value set in the LiveryConfig.cfg file under the INI_OPTION_DISPLAY_OLD setting. Specifically, INI_OPTION_DISPLAY_OLD = 0 should correspond to the new display type, and INI_OPTION_DISPLAY_OLD = 1 should correspond to the old type. However, following the update, every livery based on earlier airframes loads with the "new" display type, and vice versa. The image below shows the F-HTYA by iniBuilds, which is correctly configured in the cfg to have the new display type, but is now incorrectly displaying the old type.

[haza2]

Thank you for the feedback. Will forward onto the team.

[Messttr]

The display type is still not recognised and followed according to liveryconfig.cfg even though it was included as fixed in 1.0.5. Photo below from 1.0.7 with fresh install (you can see according to config file it should be new the type of display). @haza2