A350 flaps work too slowly

[HYK]

My ini A350 sets take-off flaps after ground roll-out. And also sets the flaps during approach. The flaps all work very slowly. My engines have started. I set the flaps from 0 to 1+F which took me 1 minute. Also setting the flaps from 4 to 0 took me 1 minute 30 seconds. The ini's equivalent, the A320NEO, has the same problem of very slow flap response time!

[AYWL]

I had actually feedbacked this and my post is disregarded. I had also prove of video showing it. But anyway, I will repost it again:

The -900 variant is different from the -1000 in terms of flaps retraction and deployment timing. -900 is usually faster in deployment and retraction than the -1000.

 

For your product, the -900 version is as slow as -1000.

 

I can't make a video at sim but I can roughly provide the timing of -900.

 

Inbuild A350-900 Flaps 0 to Flaps  1+F = About 20 to 22 seconds

Real life A350-900 Flaps 0 to Flaps  1+F = About 10 to 13 seconds https://youtu.be/E80qj1C3rDM?t=272

 

Inbuild A350-900 Flaps 1+F Full 0  0 = About 20 to 22 seconds

Real life A350-900 Flaps 1+F Full 0 = About 8 to 10 seconds https://youtu.be/E80qj1C3rDM?t=1001

 

Inbuild A350-900 Flaps Full to Flaps  0 = About 31 to 33 seconds

Real life A350-900 Flaps Full to Flaps  0 = About 19 to 21 seconds https://youtu.be/KtKqg1tOjYo?t=754

 

Is just that the -900 variant need adjustments. The -1000 variant is pretty fine.