Jayberlin

Hello everyone, too early to celebrate: last night and this morning I tried a longrange service (planned WSSS to FYWH, about 11:30 flighthours), but after 2h at first flight frozen displays (no error messages neither in Windows nor in the Fs2024 dev mode console) and after approx 35 minutes of the second flight a CTD with Windows error message (0xc00000050). So the aircraft is still unflyable. 😞 Inibuild Support told me that they have contacted Asobo for their consultation. Brgds, Jayberlin

Hello everyone, last weekend I made an BIOS update to my ASUS z690-F Gaming mainboard (to version 4301, which came out end of May) and since I did that update the freeze of displays is gone (for now). For the time being - I made just a short flight of about 2 hours - my problem of freezing displays is gone. Before that BIOS update (coming from version 4101) I was not event able to use XMP1 with my G.Skill Z5 DDR5-6000 RAM; memtest86 and also the Intel XTU stresstest fails (especially with the AVX-tests). I found on an Intel website regarding failed AVX-tests, that it may help to set in the advanced BIOS settings -> AI tweaker -> SVID Behavior to "Intel fail safe". I also avoid to use the weather radar in A350, as I read that in another post in this A350 forum. However, I am not able to say wich action mentioned above solves my problem, but I hope the CTD/freeze-problems of the A350 are solved. Next I will try a longhaul flight and keep you informed if A350 flys stable now. Brgds, Jayberlin

Hello everyone, I have the same problem with frozen display units: Since A350 version 1.0.10 this behaviour starts for me and I am not able to complete a longer flight with the A350 in FS2024. After approx. 1,5-2 hours flight time all displays are frozen (aircraft is still flying and sound and cockpit cameras are working). I am able to manupulate some switches and knobs, however there is no reaction on the respective display/functionality. I am on FS2024 SU2 (version 1.4.20), Windows 11, 64-bit, 24H2, and an intel i9-12900K gaming PC with 64 GB DDR5-6000 RAM and an AMD Radeon RX7900 XTX graphics card. I have had serveral emails with the inibuilds support, but nothing of their advices worked so far for me (reinstallation, clearing the WASM folder, etc). For the time beeing the A350 is unflyable in my FS2024. However, other planes such as the FlyByWire A380X or the Headwind A339X works fine, so that I assume, that it is a problem of the A350. I try to reproduce if it is a WASM crash by reading out the failures and errormessages in the console of the FS2024 developer mode, but it seems, that I have to wait 1-2 hours until the next crash occurs. I will keep you informed. PLEASE iniBuilds-Team: help me / us with this "freezing displays error" - your A350 is such a nice and advanced airplane !!! Brgds from Berlin, Germany, Jayberlin