Rick Ryan

When selecting an arrival runway the ILS frequency is different than it is on the NAVAID page, but the Identifier is the same. Shouldn't they agree?

I did that just now and it looks like that solved the issue. Thank you!

I'm getting this fault regularly. I've calibrated the throttles multiple times, but it has not helped. It's a minor nuisance and to clear the issue I just have to advance the throttles and bring them back to idle and it's good to go. I am wondering if this is a bug or I'm maybe doing something wrong.

Two flights in a row now I've gotten sudden electrical failures. First time was 2200 miles into a 2300-mile flight, second time was today on short final at 1800 feet after an 800-mile flight. I did not touch any controls and was setup for an Autoland on today's flight and I was too low to try and fix the issue, so the plane just crashed. Needless to say, it's a bit off putting to fly 3000 miles and not be able to make either landing. Is there some way to configure the aircraft so that there are no failures?

Making a terrible racket. It doesn't sound at all like it did before the latest update

I am having the same problem. Autoland floats too long until I have to force the plane down before running out of runway

I am not, thank you for checking with me

I did purchase the tca throttle quadrant, but it hasn't arrived yet. when I get it, I'll see if that helps the issue

left click to advance the throttles. I control my camera with the keyboard keys. I have a very basic setup in controls, and I haven't identified any duplicate settings or anything that would conflict.

I have no peripherals connected except an Airbus sidestick. I control the throttles with my mouse, and the throttles have started to drop to idle for no apparent reason. Anyone else have this issue?

yep , me too. The retard callout never stops until shutdown

I've tried that previously, they aren't working for me

AQMeoDj2pfkZ65VRBJNn_7dTllGhygva4h18sDSaOIhQDEOwwweYP4b-1gYGN4UTFsvXR0s-zkzRONvoRnM3SzEt.mp4

I don't know if this will be helpful to anyone, or maybe everyone except me already knows this. When I start a flight and choose a different location that my pervious flight the OIS does not update to the new location. I was finding myself getting "unable to find safe performance data" messages due to the OIS using my location from a previous flight which had a much shorter runway. When I updated to the new location in the OIS I was then able to get the correct TO Perf data.

I did not have any cautions. Shortly after takeoff it showed up. I guess a better question would have been what might be the possible causes for an Autoland to be inoperative? I didn't plan on using Autoland but having not seen this message before it made me curious as to why.

Is this fixable while in flight? Thanks

Thank you

There appears to be clickable spots on the screen but nothing happens when I try to select "clear"

I consider myself lucky if I can open FS24, start a flight and enter a location and actually have the sim start up. It's not unusual for me to get 2 to 3 crashes in a row before actually getting a flight going. I typically reboot my computer after the 2nd crash, and that seems to help, although doing that shouldn't be the norm

A few days ago this was working, now it's not. When I select my destination runway and select the arrival ILS, it's no longer auto populating the ILS frequency

I found the problem and believe it or not the problem was me. I was looking in the wrong place