[(FOB + FU) - BLOCK = 0 KG Issue]

8 hours ago, pilotalihoteit said:

The value is supposed to appear in multiples of 50 KG according to FCOM.

I had -64 at one point, yet it still never showed. Does anyone else have any experience seeing it actually work?

[(FOB + FU) - BLOCK = 0 KG Issue]

We'll take an example of what I have active right now. The aircraft is reporting 43000 KG (FOB) and 4300 + 4340 (FU), which equals 51640 KGS. If we subtract my OFP Block fuel (which was also entered into the aircraft don't to the milliliter), we get 51640 - 51608. That equals 32 KG. I am assuming this means I have 32 KG more fuel on-board than what is estimated. However, as you see in the image below, it still says 0 KG as the difference. I wouldn't report this if it was in Tonnes, however, I'm wondering if this is sensing down to the kg or if it is in increments, as if, say, it only reports it if it's 100 KG or every 100 kg. That's why I find it weird that it says 0 KG. It has been like this on all 3 of my flights, where I've also calculated that I am in a downward of -64 KG as a result of the calculation.

I'd like some information on that, or is this a bug?

From my perspective, it seems as if the system is not functioning. Not sure how other feels about this.

[WASM Crash]

3 hours ago, Hans-Peter Benz said:

Exact same problem, already occurred after 17min in flight. 
checked the COND Ecam Page, afterthis systems frozen, can’t change anything. Plane still flying, but not controllable anymore.

I was on the COND page at one point too, probably right before i left the flight deck. This might be where the WASM crash comes from👍🏻 

[WASM Crash]

I was making myself some sausage and fries when I looked over at my navigraph seeing I was deviating from my flight route. When I rushed back to the flight deck I noticed I could not press anything, everything was frozen, but the plane was moving. Rest in piece 5 hours.

About 20 minutes prior to the crash I was looking through all the ECAMS getting familiar with the aircraft and how the systems and buttons work. I didn't really press anything out of the ordinary.

• Aircraft: A350-900
• Simulator: FS2024
• Navdata Method: NAVIGRAPH
• OFP: Not sure if it's related but sure LFBOOTHH_PDF_1740685756.pdf
• WASM Error: WASM: Error during CTR_gauge_draw execution. Error code : 0xc0000005
  WASM: Module vfs://inibuilds-aircraft-a350/SimObjects/Airplanes/A350/attachments/inibuilds/Function_Interior_A350/panel/inibuilds-A350.wasm is now dirty
• Specs: i7-11700f, RTX 3050 and 36 GB RAM