[1.0.9 - No Start ENG1]

I did a flight earlier and found something that worked

Put knob in CRANK first for about a minute, then switch to IGN START, and turn on the engine that's running hot. It'll take a while to cool down but eventually started for me

 It seems like (at least for me) if you put it in IGN START first, it'll stay hot and never cool down and you'll have to exit the flight

However, after it worked, the sim crashed to desktop about an hour into the flight. So whatever. LOL

[1.0.9 - No Start ENG1]

Same issue here. And I haven't yet seen any acknowledgement from Inibuilds on this issue. Do they not have testers to find BIG problems like this before rolling it out????

[v1.0.9 EGT]

Same exact Issue here..... the suggested solution of putting it into CRANK for a minute did not work for me either unfortunately. Come on Inibuilds, how do you guys miss something like this?

[A350 v5 4x time compression broken?]

Ever since the most recent update, whenever I try to run 4x sim rate during flight, within 15 minutes or so it will start violently rocking back and forth and eventually disconnect AP. Seems to struggle with the direct crosswind maybe? 

[Fuel Imbalance in flight, engine still using fuel with the pumps off?]

44 minutes ago, matsparky99 said:

I had something similar on a one engine inop departure that basically whatever I was doing there was no way to take the fuel from any other source than the main tank of the relative engine.

It looks like the fuel system is either not modeled completely or is very bugged.

 

Here is the link to my post about that which never received a response:

 

 

There is definitely something wrong with the way they've modeled the fuel system. About an hour after I took that screenshot, for some weird reason the plane stopped using fuel altogether, stayed at 24,000kg of fuel for the entire last 2 hours of flight. Didn't change anything with the configuration of pumps or anything, and the plane kept flying just fine, don't understand...

[Fuel Imbalance in flight, engine still using fuel with the pumps off?]

Flying from LSZH to KEWR today, I got an ECAM message of a fuel imbalance, which when I first looked, it WAS imbalanced by about 4000kg. I did as the checklist said, turned on the crossfeed and shut down the fuel pumps for the left side engine. But the fuel qty is still going down. Is there some sort of built in random fuel leak failure on the aircraft or is this a bug??

 

 

[Refueling Port is still open during flight?]

After taking off from EGLL, I realized that the fuel port was still open. Didn't happen on the flight I did yesterday. No warnings or anything in the cockpit. Is this a bug when using GSX or something else?

 

 

[Plane stalling itself out???]

Did my first flight in the A350 today as I finally had a day off from work... Going from EDDM to OMDB in FS24. Started out relatively fine aside from it running at very low frames which I assumed was just from the SU1 beta build, but once I got around 4 hours into the flight. it violently pitched upwards at 10k fpm until it stalled out, then starts plummeting towards the ground. Finally get control of the aircraft and stabilize it, hit the AP button and immediately goes rocket-ship mode again. Is this something I'm doing wrong or is this yet another half-baked, unfinished Inibuilds plane... I don't really know what I expected here, not a single one of their planes works as it should

[Liveries for 2024?]

Tried moving over the liveries from the inimanager for the V2 from 2020 to 2024 and they don't show up when I boot up the sim (I assume because they are different models). When can we expect liveries to be available for the 2024 neo? Flightsim.to has hardly anything available either, kind of surprising considering how fast they usually pump out new liveries

[IniManager Download Speeds?]

I believe I have fixed it. I force restarted the manager, and rather than queuing everything up, I let the sceneries individually at a time. Even though the other ones in the queue weren't downloading at the same time, they seem to have been leeching the download speed of the one that is installing somehow? Not sure 

[IniManager Download Speeds?]

I forgot to add, I've already checked that my firewall isn't interfering and my internet test speed still tests around 900 Mb/s, so I'm assuming it's something with Inimanager specifically

[IniManager Download Speeds?]

Hello

 

I recently built a new PC and I am re-downloading all of my MSFS addons. I queued up all of my purchases from Inibuilds through the manager (58 items by the way) and the download will start out at normal speeds for me, between 300-600Mb/s, the download stays around that speed until around the 60% mark, and then drop down to 10-60 kb/s for the remaining download, which literally ends up taking an hour or two to finish. Then same thing on the next download. Any other download I run outside of the manager runs at normal speed. 

 

Is there a way to fix this or a different way to download the sceneries? I'd rather not spend several days downloading sceneries

 

Thank you