kjhnor 4 Posted February 13 Share Posted February 13 (edited) Hi Nice airport. I notice that the cars in the car parks all appear flat. The airport appears near the top of my Scenery.ini file. Is this how they should look ? Edited February 13 by kjhnor Link to post Share on other sites
Delta_Who 22 Posted February 13 Share Posted February 13 7 minutes ago, kjhnor said: Hi Nice airport. I notice that the cars in the car parks all appear flat. The airport appears near the top of my Scenery.ini file. Is this how they should look ? Hi there. Yes that is how it should be, although not sure why that house is there. May be some sort of Trueearth asset. That site of cars was temporary at the time the orthoimagery was taken. We'll see if we find time to improve but no promises. Link to post Share on other sites
kjhnor 4 Posted February 13 Author Share Posted February 13 Also trees in front of the Boeing hangers ? Link to post Share on other sites
flyingfudge 15 Posted February 13 Share Posted February 13 That's strange. I've got trees in front of the Boeing hangar as well but only 5 of them.! ( I can't submit a screenshot because it says I've used up my upload allowance & I don't know how to resolve that ) Link to post Share on other sites
Delta_Who 22 Posted February 13 Share Posted February 13 I've already put an exclusion zone for 1.1 which should stop it. Also no need for duplicate posts 1 Link to post Share on other sites
kjhnor 4 Posted February 13 Author Share Posted February 13 Re the duplicate post. Sorry about that. I really was not sure whether to add to original post or crate new. Tried to delete the duplicate but was not able to. Thanks for your quick responses. Link to post Share on other sites
Delta_Who 22 Posted February 13 Share Posted February 13 1 minute ago, kjhnor said: Re the duplicate post. Sorry about that. I really was not sure whether to add to original post or crate new. Tried to delete the duplicate but was not able to. Thanks for your quick responses. Hehe it's fine. 1 Link to post Share on other sites
brownbear118 0 Posted February 13 Share Posted February 13 Not sure if anyone else has noticed, however Reserve Runway has been turned just into a taxiway. Which in real life "tonight for example" It is a runway. Anyways of changing this and adding runway lights ? Link to post Share on other sites
Delta_Who 22 Posted February 14 Share Posted February 14 1 hour ago, brownbear118 said: Not sure if anyone else has noticed, however Reserve Runway has been turned just into a taxiway. Which in real life "tonight for example" It is a runway. Anyways of changing this and adding runway lights ? For the time being, no. Although interesting it seems that flights tonight are using 08R. It's something I've thought about but 08L/26R are rarely ever used irl or in-sim(which also means restricted ground movement since the approach/departure paths overfly Pier 1. It's use as a taxiway is pretty much typical. Link to post Share on other sites
AntonBunk 32 Posted February 14 Share Posted February 14 1 hour ago, brownbear118 said: Not sure if anyone else has noticed, however Reserve Runway has been turned just into a taxiway. Which in real life "tonight for example" It is a runway. Anyways of changing this and adding runway lights ? This, and also the RNP approach into 08L isn't working with the ToLiss A319 (disclaimer: Haven't checked on other aircraft or without the Origami EGKK). There was another guy in the queue for 08L on vatsim who had the same issue; I programmed 08R enroute, and when changing to RNP 08L all the waypoints to the runway are correct, but the runway stays at 08R (or 26L or whatever you programmed in the first place), as well as the RNAV descent profile seems to align with the runway which was first entered and not 08L. Papis work fine though, thus landing went fine. Flying in and out of Gatwick very regularly on VATSIM (and a few times real life as well) I like that 08L is basically a taxiway and I think it's more realistic to leave the lights off. However, maybe there's a possibility to have this defined by the user via the config files. And if the RNP thing would work that would be great too - from minimums you can make it down ok even on the taxiway lights if you're aligned right. Link to post Share on other sites
Delta_Who 22 Posted February 14 Share Posted February 14 (edited) 29 minutes ago, AntonBunk said: This, and also the RNP approach into 08L isn't working with the ToLiss A319 (disclaimer: Haven't checked on other aircraft or without the Origami EGKK). There was another guy in the queue for 08L on vatsim who had the same issue; I programmed 08R enroute, and when changing to RNP 08L all the waypoints to the runway are correct, but the runway stays at 08R (or 26L or whatever you programmed in the first place), as well as the RNAV descent profile seems to align with the runway which was first entered and not 08L. Papis work fine though, thus landing went fine. Flying in and out of Gatwick very regularly on VATSIM (and a few times real life as well) I like that 08L is basically a taxiway and I think it's more realistic to leave the lights off. However, maybe there's a possibility to have this defined by the user via the config files. And if the RNP thing would work that would be great too - from minimums you can make it down ok even on the taxiway lights if you're aligned right. One of my ideas was to just have them configurable via SAM, which wouldn't need user editing. But for the time being, that is some RnD time. My immediate focus right now is to make sure rollout is going smooth. Approaches, I can't help you with, sorry. That'll be dependent on the airac data or such. Likewise ILS data would need to go through the Laminar gateway Edited February 14 by Delta_Who 1 Link to post Share on other sites
Delta_Who 22 Posted February 14 Share Posted February 14 1 minute ago, Delta_Who said: One of my ideas was to just have them configurable via SAM, which wouldn't need user editing. But for the time being, that is some RnD time. Approaches, I can't help you with, sorry. That'll be dependent on the airac data or such. Likewise ILS data would need to go through the Laminar gateway Unless Toliss is grabbing the runway from the airport itself? Would seem a bit odd, but something to investigate I suppose. Link to post Share on other sites
Pilsner 0 Posted February 14 Share Posted February 14 2 hours ago, Delta_Who said: Unless Toliss is grabbing the runway from the airport itself? Would seem a bit odd, but something to investigate I suppose. Pretty sure it does, yes. Their reasoning was that it’s better for the procedures in the FMGS to match the scenery, it’s caused some oddities with DUB too, if I recall. Link to post Share on other sites
AntonBunk 32 Posted February 14 Share Posted February 14 On 2/13/2021 at 1:53 PM, kjhnor said: Also trees in front of the Boeing hangers ? I don't have the trees! Running Origami EGKK without any additional ortho, scenery or autogen enhancements Link to post Share on other sites
kjhnor 4 Posted March 6 Author Share Posted March 6 They fixed this in the last update. very impressed how quickly they got around to the fixes. Link to post Share on other sites
DUC 0 Posted March 11 Share Posted March 11 anyone know why i have so many antennas and random houses, i have egkk first in the scenery config file. Link to post Share on other sites
Delta_Who 22 Posted March 13 Share Posted March 13 Not entirely sure. Can I see your scenery_config file? Link to post Share on other sites
DUC 0 Posted March 13 Share Posted March 13 (edited) scenery_packs.ini tried to go to egkk without your scenery and the objects is still there. Edited March 13 by DUC Link to post Share on other sites
Delta_Who 22 Posted March 13 Share Posted March 13 Well this is one of the neater configs I've seen. Only thing that I can possibly think of that may be popping through is X-Europe. For efficiency sake, could you try disabling some of that and see what happens? Then I can know if I need to add any additional exclusions. Link to post Share on other sites
DUC 0 Posted March 13 Share Posted March 13 I know my config is a damn mess, i deleted x-europe and that did the trick. Link to post Share on other sites
Delta_Who 22 Posted March 13 Share Posted March 13 35 minutes ago, DUC said: I know my config is a damn mess, i deleted x-europe and that did the trick. No it's actually neat. Most other configs I've seen are a damn mess I will have to take a further look at this though. Not too familiar with x-europe Link to post Share on other sites
DUC 0 Posted March 13 Share Posted March 13 Great, thanks. for now i will not use x-europe as i like egkk way better thanks for the great support. Link to post Share on other sites
flyingfudge 15 Posted March 14 Share Posted March 14 I deleted xEurope some time ago for the same reason. Buildings and trees popping up everywhere ( on runways, trees on taxiways etc ). Shame because it's a good add-on apart from that. Link to post Share on other sites
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now