On my first flight YPAD to OMDB all was going so well until I was about 500ft from landing. I started getting really bad stutters with warnings of my GPU being at its limit however I managed to land and taxi to the gate. It was not enjoyable. Especially the fact I just purchased this scenery/airport package.

On arrival to the taxi stand the VDGS does not work (On this flight I taxied to F13) and after the jetway was connected (using the GSX profile provided with this purchase, the deboarding process commenced and GSX sends the bus for all passengers to deboard from the rear stairs. Even though the jetway was attached the GSX tablet stated there was no jetway available. Very unenjoyable.

Thank you.

The jetways had always connected properly for me however gsx could not detect them and i had na visuals passangers boardin.

At some point however the EFB jetway tool when choosing a jetway and door spawned a new jetway intead of connecting the egsisting once.

I tried complitly reinstaling the scenery, jetways tool and the GSX profiel.

Any ideas?

the new OMDB v2 automatically installs Skydive Dubai & Landmarks (v.1.0.0) in the Community folder, however this seems to not be working correctly in MSFS2024.

I noticed many issues with the night lighting which is either not working at all nor animated. A few examples that I've found:

• Dubai Marina: the Ain Dubai wheel isn't lit up nor it has animated lighting

• Dubai Marina: the yacht parked isn't lit

• Downtown Dubai: the cocacola arena isn't illuminated

• Downtown Dubai: the Burj Khalifa doesn't have the enhanced night lighting (no white led outlines)

to name a few.

Interestingly, the Ain Dubai does show some lighting when viewed from afar, but once you get closer and the model switches for the more detailed LOD, the lighting disappears (2nd screenshot)

I have done the following steps to attempt to correct the issue without any success:

• cleared the rolling cache

• deleted the StreamedPackages community folder

• deleted the community folder content

• re-downloaded and installed DubaiV2 via the manager

Also:

• I do not have any conflicting 3rd parties addon such as the Orbx dubai city pack

• I do not own the premium version of FS2024 so there's no Asobo OMDB to be disabled, in fact there are no issues that I've seen with the airport model itself, just with the city landmarks objects

• I have tried to manually install the Skydive Dubai & Landmarks package from the manager but it's only currenty for MSFS2020, manually copying the files into the MSFS2024 community folder generates more conflicts and bugs, but it does restore some of the night lighting

Is there any other way to fix this or maybe is there an official update coming for the night lighting?

Thanks a lot

I've attached some screenshots to illustrate the issue:

I have the latest version of Dubai v2 updated yesterday via the ini manager in SU6 of MSFS2024 with the latest GSX version and GSX Profile and upon landing into Dubai it looks like I have duplicate jetways?

Any suggestions?

Overall I'm very happy with v2 and must admit, that FlightSim has come a l9ng way since I purchased FlyTampa's Dubai first back in 2004. It is amazing how much love and passion was put into details. I found the smoking rooms I used back in December 2025, the Hard Rock and even the McD. 😁

But, what I noticed was that regardless if I use JF FS Traffic or AIG FSLTL the main terminals A and B gates are not occupied at any time of the day, with the C gates having six to seven Emirates aircraft parked. All other gates in this area are unoccupied. There are some EK aircraft at the cargo or maintenance areas, some other airlines at the VIP area. Other airlines park correctly at the satellite building, FlyDubai, SpiceJet also at T2. What can be done? I tried increasing traffic, increasing static aircraft, but the result is always the same.

Other airports like Delhi, Bangkok, Kuala Lumpur, Singapore, Frankfurt, Munich or even Nuremberg are correctly populated.

Can you help me perhaps with a realistic setting for FSLTL? Is this "issue" known?

Your understanding and assistance is highly appreciated.

Kind regards.

They were never there before the update when using V1, and streamers I watch flying V2 don't seem to have them. They look like the buildings you'd see with a vanilla install or when using the Asobo airport (which as you can see from my screenshot is disabled). I'm getting severe stutters exactly where they're in view:

• on approach, at touchdown, on rollout and on the take-off roll;

• real fps before FG drops to about 22

• the main thread is limiting, at 30–38 ms per frame.

Other airports are smooth, and looking down at the instruments helps, so I suspect these buildings appearing have potentially caused the stutters.

Already tried, with no change:

• reinstalled OMDB V2

• iniManager options (people, ground crew and terminal details off)

• confirmed only the iniBuilds OMDB is enabled

• turned photogrammetry off (the buildings stay)

• cleared the rolling cache and SceneryIndexes;

• did a full clean reinstall of MSFS 2024 with only V2 installed afterwards

Hardware is fine.

Is this a known issue, or a missing exclusion? Has anyone else seen these buildings? I can't seem to get rid of them no matter what.

My Setup:

TLOD base - 100
OLOD base - 100

MSFS Settings are medium to high

MSFS 2024 (Steam) v1.8.16.0

Dubai V2.0.2

Hardware: RTX 5090, 7800X3D, 64 GB DDR5-6000.

GSX newest update mentioned a fix but I just started a flight from OMDB and the 3 jetways at Gate F12, only one was operating (I suspect the top one for an A380). I was in PMDG 777-300 and your multi jetway system only identified the top jetway at this gate that could connect to any door. When boarding commenced it was great not to get the stairs connecting but there were nil passengers, even though the aircraft system was counting up the 367 passengers loading.

Would be good to at least get an indication that GSX are on board to assist Inibuild with resolving this.

I've went through this forum and don't see many complaining about this. How is this still an issue in the new update?

I purchased OMDB in the MSFS 2024 store, but didn't realize it was V. 1.0.1 - how to upgrade to V2? Thanks!

I've just tested OMDB v2 a bit and saw that the jetways are not moving.

With FBW's A23X neither switched with the onboard EFB nor with GSX Pro.

Please check that, iniBuilds...

Thanks a lot!

Bert
FS Reviews

Gate F12 is superb - has the space for the A380 - but, interestingly, in the real world is not equipped for the A380!

Can we have the gates equipped for the A380 large enough to take the plane?

After installing, I have a GSX profile of the 13th of september 2026, without clicking on the button in the inibuilds app.

What is the button for, if you dont have to click on it?

The yellow gate parking line ,including the stop markers for various aircraft models, is offset from the default GSX position;

this occurs at all gates in concourses A, B, C, and D.

At first many thanks to iniBuilds to update OMDB to v2 for MSFS 2024 that much - most appreciated...

May I kindly ask to change the approach light systems (ALS) of runways 12L, 12R, 30L and 30R from a CALVERT (HIALS I) to CALVERT HIGH (HIALS II) keeping the Sequenced Flashing Lights (SFL) and the Touch Down Zone Lightings (TDZ) alive which would be correct according to the current charts from Jeppesen and the General Civil Aviation Authority of the UAE https://www.gcaa.gov.ae/en/ais/aip-view-package.

Thanks a lot in advance!

Bert
FS Reviews

When GSX Pro started, the following message appeared:

I selected - AUTOMATIC.

The jetways do not move! I tried this at different parking gates.

I just wanted to buy the premium version for MSFS2024, I do own the 2020 version. I tried to apply the discount code (OMDB-UG) but it isn't accepted.

Is there a new upgrade code available?

Thanks and kind regards,

Raffael

Recently bought OMDB for msfs24 and in the pmdg 777 300ER I couldn’t select any SIDS for those runways. I have disabled the default OMDB, have updated all nav data with the hub. Any clue as to what the issue might be? Thanks

Any suggestions on how to rectify this issue which is limited to only to OMDB by inibuilds. This wasn’t happening with the default scenery.

I thought this was maybe because of GSX's 3rd-party airport's conflict with jetways. But GSX's Jetways are all disabled in MSFS 2024.