Even with EFB PA volume set to 100% and the radio panel PA knob On and high, I am still not hearing any PA in the cockpit or cabin.

I am on PC.

Thank you!

Reza B

I've noticed a bunch of sound issues with the initial release of the A380. I'm having a hard time getting recordings of what I'm referring to, as the issues are mainly related to spatial positioning, so I hope my description is enough to explain them:

1. Engines 3 and 4 have no exterior sounds. Or at least, the sounds aren't positioned where the engines actually are. The entire engine soundscape seems to be shifted to the left side of the aircraft, and not a single exterior sound seems to originate from Engines 3 and 4. Also, when putting these two engines into TOGA, there's no noticeable change in sound. The interior sounds are fine, though.

2. Not only does the exterior sound sample for the packs sound more like a hair dryer than an aircraft's air-conditioning system, but the sound also seems to originate from the nose of the aircraft.

None of these seem to be related to streaming. I've downloaded the aircraft and cleared WASM several times, but nothing has changed.

I hope you can reproduce these issues!

Thank you.

Thank you for this beautiful aircarft. Everything about the operation of the A380 works just fine, but I seem to be having some issues with GSX passengers and cargo loading.

There are no seated passengers after loading and loading and unloading 480 passengers only takes a couple minutes (weird). During Cargo and luggage loading and unloading, the iniA380 doors open as expecetd, but there are no GSX ramp agents or GSE. This works fine with all other aircarfts so I am not sure how to fix this. What I tried so far was run GSX config, uncheck and recheck ini A380.

*Update: After carefully looking at GSX config, I just noticed that there is NO iniA380. Was there supposed to be? Any idea how to fix this?

Steps I Have Taken to Troubleshoot:

Spawned Cold & Dark at a lightweight default airport (Hamilton Island - HTI) to rule out Xbox RAM limitations.

Used the default iniBuilds House Livery (no third-party liveries).

Used the EFB panel state shortcuts (ON GPU / ON APU) to power the aircraft at the gate.

Opened cabin doors (1L/2L) and successfully attached the jetway.

Set the EFB Audio Language manually to English (US) / English (UK) and verified the EFB volume sliders are at 100%.

Verified the PA volume knob on the center pedestal is pulled out/activated and scrolled to maximum volume.

Triggered passenger boarding on "NORMAL" speed and verified the passenger countdown ticker is successfully counting upward on the EFB.

Set the cabin screen entertainment/music system to "AUTO".

Checked multiple camera views (External Wing Views and Passenger Cabin Views) to ensure it wasn't just muffled by the soundproof cockpit door.

Ensured "Headphone Simulation" and "Loudness Limiter" are turned completely OFF in the main MSFS general sound settings.

Performed a full hard reset of the Xbox Series X console to flush the cache.

Result:

Despite the passenger count rising normally and following all the correct cockpit steps, there is absolutely zero cabin audio, boarding music, or flight attendant voices playing from any camera view. The system appears completely muted on Xbox Series X. Please let me know if a patch is in the works to fix the audio directories for console players. Thank you!

Thank you

The sounds seem to be duplicated all across the different lavatories, rather than from the single one.

Sometimes you can turn one on my accident through a clickspot and the whole plane sounds like running water, which is what I experienced today.

https://drive.google.com/file/d/1YOO_GIpczQUWj9ey6nZWs5W2OckqTLv-/view?usp=sharing

Sadly this is a bug that was already present (and reported) on the A350 as well as other ini Airbus aircraft and still has found its way onto the A380.

The volume of them is otherwise ok, tested having made no adjustments during the initial din!

.The RAAS "on taxiway" announcements are not working, whereas the runway approach and runway announcements are working fine.

.Cabin announcements cannot be heard in either the cockpit or the passenger cabin, despite the noise-cancelling headset not being active in the simulator (EFB) and the PA volume button being turned on and fully maximized.

Hopefully these can be looked into. Thank you! (Xbox Series X)