Following our recent v1.0.4 update, the team has continued reviewing your feedback and addressing reported issues across the iniBuilds A380 Airliner.

Today, we're pleased to release v1.0.5, bringing fixes to the Captain's Vertical Situation Display, upper deck seat numbering, light states reported to external applications and the EFB enroute map.

For our Xbox community, we hope to release the Xbox version next week, with the changelog items from both v1.0.5 as well as upcoming v1.0.6.

The full changelog can be found below. The v1.0.5 update is now available to download via the In-Game Marketplace.

V1.0.5

SYSTEMS

• FIXED Captain's VSD not displaying ranges

ART

• FIXED Duplicated numbering of upper deck seats 7A and 7K

• FIXED Incorrect light states reported via SimVars, affecting external clients such as ACARS

EFB

• FIXED Enroute map tiles and display not rendering

iniBuilds Team ❤️

Following the release of the iniBuilds A380 and our recent v1.0.3 update, the team has continued reviewing your feedback, investigating reports and making further improvements across the aircraft.

Today, we're pleased to release v1.0.4 for the iniBuilds A380, bringing another collection of fixes and refinements across systems, avionics, art, EFB functionality and audio.

This update addresses several key areas reported by the community, including improvements to flight control protections, navigation and vertical guidance, TCAS functionality, alongside further stability fixes and refinements. We've also introduced additional persistence functionality and improvements to the aircraft's visual details and overall experience.

Thank you for your continued feedback and support as we work to further improve the A380. The full changelog can be found below, detailing all fixes, refinements and additions included in this release.

The full changelog for these updates can be found below. The update can now be downloaded via the In-Game Marketplace.

V1.0.4

SYSTEMS

• FIXED VD in PLAN mode display incorrect

• FIXED TCAS & TA/RA alerts not working

• FIXED Wind page fixes and refinements

• FIXED RECEIVED CPNY WIND leaving graphic artifact

• FIXED VSD Glideslope capture indication is incorrect

• FIXED Repeated beacon ON/OFF signals affect external applications

• FIXED High Speed Protection override in normal law

• FIXED VNAC Manual Altitude restriction ignored

• FIXED Rudder not properly responding to inputs on landing after AP disconnect

• FIXED Low speed protection behaviour not matching reference

• FIXED Jump Ahead pitches aggressively and intialization

• FIXED VSD profile bugged in open climb

• FIXED Wasm crash on PC when pulling wind data to FMC

• ADDED Persistence to RMP Freq, RCV/XMT and Volume knob positions

ART

• FIXED "No Mobile" cabin sign no longer illuminates

• FIXED Emirates logo is missing from the belly

• FIXED QATAR logo is missing from the belly

• FIXED Door 1U decal present with door open

• FIXED BAW thumbnails not matching livery

• FIXED Qantas livery missing RR placard

• ADDED Make entire cabin accessible in walkaround mode

• ADDED Add white underside wings and white pylons to Lufthansa new

EFB / OIT

• FIXED CPT Tablet settings not synched with FO tablet settings

• FIXED GSX gets stuck refuelling if done while APU running

SOUNDS

• FIXED Cabin announcements stop after switching views

• FIXED Arrival announcement playing twice

iniBuilds Team ❤️

Following the release of the iniBuilds A380, the team has continued working through your feedback, investigating reports and refining the aircraft across systems, avionics, art, EFB/OIT functionality and audio.

We apologise for the delay in bringing the v1.0.2 update to you. During testing and verification, we encountered a roadblock that prevented us from accurately testing the WASM. We wanted to ensure the necessary checks were completed and that the update would work as intended before making it available. Thank you for your patience while we worked through this.

However, today, we’re pleased to release v1.0.3 for the iniBuilds A380, bringing together all the fixes and improvements previously planned for v1.0.2, alongside further changes developed during this time. Both changelogs below are included in this release, detailing the full collection of fixes and improvements.

The full changelog for these updates can be found below. The update can now be downloaded via the In-Game Marketplace.

V1.0.3

SYSTEMS

• FIXED Add dropdown to select checklist version to use

• FIXED Implement BA and Emirates checklists versions

• FIXED WING ANTI ICE REVERSED

• FIXED CONFIG and TAKEOFF ECAM should latch on when the T.O test runs

• FIXED Feed tk 1/2/3/4 main+stby pump fault procedure missing/incorrect items

• FIXED ECAM flickering

• FIXED VSD - Level-off-line missing

• FIXED Controller detent behaviour refinement

• FIXED ADF text overlapping

• FIXED RMP HF Improvements to display and function

• FIXED Step climb MCDU page text alignment

• FIXED FMS POSITION drop down menu

• FIXED METOTS logic inaccuracies

• FIXED Increase NWS lockout to approx 60KIAS

• FIXED EA Batch 7 - when selecting LRC on INIT page, it switches back to ECON

• FIXED ECON SPD mismatch

• FIXED When autobrakes armed and BRK MAX BRKING autobrakes trigger to MAX w/o input

• FIXED NWS functionality on rollout with AP on

ART

• FIXED Refuel panel: art corrections

• FIXED Inverted bird strike animations

• FIXED All right-side Doors main and upper deck have flipped decal

• FIXED BA engines white placards for the engines

• FIXED A6-EOE under-wing reg incorrect

• FIXED Missing cabin interactions

• FIXED Low-res texture package - Cargo Bay door interior missing textures

• FIXED Engine Pylons not flush with wing

• FIXED Right inner flap track fairing misaligned

• FIXED Right nosewheel brake line disconnecting when turned

• FIXED Qantas - missing A380 text on fuselage

• FIXED Qantas livery missing engine type displayed

• FIXED Thai Upper door animation mismatch

• FIXED Korean Air fence tips incorrect colour

• FIXED Lufthansa Liveries - missing white painted wings

• FIXED Cabin: Shower remaining-time indicator does not illuminate

EFB / OIT

• FIXED GND SVCS - Can open all doors in flight

• FIXED Weather not updating on turnaround

• FIXED Fuel Figures not clear if kg or tons

• FIXED Replace separate maintenance and persistent settings toggles into one

• FIXED Stuck on refueling if done with APU running

• ADDED Option to disable Maintenance and Persistence

• ADDED Add NSS MASTER SW simulation

SOUNDS

• FIXED Cabin Announcements not playing

V1.0.2

SYSTEMS

• FIXED Terrain radar not working correctly when streamed

• FIXED OFFST - SPD and ALT estimates wrong

• FIXED CPDLC - Sending STBY not working

• FIXED PERF CRZ page does not show distance to next Step-Climb

• FIXED Time formats incorrect on TIME MARKER

• FIXED STEP ALT page - Dropdown layering issue

• FIXED EWD Thrust Target bugged after more than 3 legs in same session

• FIXED Potable Water / Waste quantities not updating in flight

• FIXED Missing click spot on "TMPY F-PLN" after deleting a speed constraint

• FIXED Unresponsive engines after selecting GA SOFT / invalid Thrust Targets

• FIXED OANS runway label jumps sometimes

• FIXED OANS runway label displayed backwards sometimes

• FIXED ETA and Dest EFOB calc wrong after inserting hold

• FIXED Strobe Lights switch on auto logic

• FIXED Aircraft icon shows over VSD in Plan Mode

• FIXED FAP Doors Page - incorrect wording

• FIXED VSD Flickering on climb/descent profiles

• FIXED Elapsed Timer should indicate times up to 99h59m

ART

• FIXED VR Zoom implementation

• FIXED Missing Body Gear Steering Animation

• FIXED Rain streak direction on flight deck side windows

• FIXED Cannot tilt/move EFB in legacy controls mode

• FIXED Potable water panel decals not married to door

• FIXED Panel gap on Throttle ATHR disconnect button geometry

• FIXED Panel gap between the two MCP panels

• FIXED Hydraulic Pump Disconnect switch clickable through guard

• FIXED Strobes and beacon timing

• FIXED Various typos on cabin interior

• FIXED Rear cargo door model/textures on interior

• FIXED Bulk cargo door – Animation and model refinements

• FIXED iniHouse Livery: Forward cargo door stripe decal animates incorrectly

• FIXED ETD Livery: Bulk handle outline floating when door open

• FIXED KAL Livery: Door Decals, Color Saturation, Window Plugs, Engine Logos and Top of Wing Registration

• FIXED ANA (JA382A) Livery: shows as Air France in CFG title

• FIXED EK Cabin: IFE buttons texture alignment on economy seats on lower deck

EFB / OIT

• ADDED EFB "AP Disconnect Protection" Option under simulation settings

• ADDED EFB "Persistence" and "Maintenance" toggles under aircraft settings

• FIXED EFB EXT PWR and CHOCKS toggleable in-flight

• FIXED EFB Bird strike dynamic values won't refresh after toggle

• FIXED EFB Throttle Calibration - Dead zones not being applied properly sometimes

• FIXED OIT Control inputs not inhibited when entering data with on-screen keyboard is disabled

• FIXED OIT Input fields not biased to capitalization

• FIXED OIT Landing Perf VPILOT entry not limited to 50 kts

• FIXED OIT TO Perf TORA value in feet - last digit cutoff when 5 digits

SOUNDS

• FIXED Master Warning aural muted when switching views

• FIXED Water sound plays in all lavatories at once

iniBuilds Team ❤️

Following the release of the iniBuilds A380, the team has been working hard behind the scenes reviewing your feedback, investigating reports and continuing to refine the aircraft across all areas of the experience.

Today, we’re pleased to release our first update for the iniBuilds A380, bringing a substantial collection of fixes and improvements across systems, avionics, art, EFB/OIT functionality and audio.

Improved Diagnostics & Optional Crash Reporting

Alongside the fixes in this update, we’re introducing additional diagnostic capabilities designed to help our development team identify and resolve aircraft systems issues more quickly.

On your first load following the update, you’ll be given the option to enable WASM crash reporting. If enabled, should an aircraft systems module crash occur, the A380 can automatically send a diagnostic report to our development team containing information such as the add-on version, failed component, relevant technical counters, aircraft position, flight plan and the latest portion of the diagnostic log.

No personal data or identifiers linking individual sessions are collected. Reports are transmitted over an encrypted connection and are accessible only to the development team for the purpose of investigating crashes. If you choose not to participate, nothing will be sent to us, although diagnostic logs will continue to be stored locally on your PC. Your preference can be changed at any time through the EFB.

This additional telemetry should significantly improve our ability to diagnose difficult-to-reproduce issues and, importantly, reduce the amount of information we need users to manually collect when reporting them.

A huge thank you to everyone who has flown the A380, submitted reports and shared feedback with us since release. This is only the beginning of our post-release work on the aircraft, and we’ll continue monitoring feedback and delivering further fixes, refinements and improvements as we move forward.

The full changelog for this update can be found below.

This update can be downloaded via the In-Game Marketplace.

⚠️ Please ensure your liveries are also updated to versions compatible with A380 v1.0.1, these are available to download via the iniManager.

V1.0.1

SYSTEMS ⚙️

• FIXED the 100 ft radio-altimeter callout incorrectly triggering after initiating a go-around.

• FIXED STEP DES functionality.

• FIXED secondary flight plan sequencing.

• FIXED inverted Increase/Decrease logic on the refuelling panel quantity selector.

• FIXED missing units for the final reserve fuel time.

• FIXED FLS deselected for LOC approach, missing normal scales

• FIXED PFD airport filtering

• FIXED FMS: FINAL TIME entry inop or incorrect

• FIXED Refuel panel: Desired value overshot / Does not shut down APU / SHUTOFF TEST bugs

• FIXED BTV/autobrake should not drop when doing a go around

• FIXED BTV incorrectly showing runway condition codes

• FIXED DECEL is still happening too late

• FIXED VNAV broken after go around

• FIXED Refined TO perf issue

• FIXED Clicking cockpit windows in flight doesn't visually open them, but system wise they do open

• FIXED Engines revving up and down when trying to maintain selected speed on the approach

• FIXED ECAM pressure warning issue

• FIXED OTHH, TOSN2R ILS 34R guidance incorrect

• FIXED VSD PLAN mode display incorrect

• FIXED EA engines do a sudden spool up when AVAIL

• FIXED AVAIL should be top layer above the ATHR arcs

• FIXED DTO broken, wipes part of the plan and not working

• FIXED NAV guidance not engaging

• FIXED Destination EFOB fluctuating every few moments

• FIXED OFP text visibility

• FIXED LEFT BRAKE and RIGHT BRAKE bindings not always working

• FIXED Thrust reverser doesn't slow plane down but accelerates instead

• FIXED When IRS are in align the ADRs are still active so TAT+SAT should show even when IRS are not fully in ALIGN

• FIXED EMER cancel doesn't remove status items when used with an active failure if then the failure disappears

• FIXED Securing Checklist - CREW OXY sensing logic inverted

• FIXED Removed clipping procedure lines in ABN ENG RELIGHT IN FLIGHT procedure

• FIXED Emer cancel should disable all active abnormal procedures

• NOTE: Some users who might have had stutters during take-off and landing may find this no longer occurs with this update. If it still occurs, please let us know.

ART🎨

• FIXED exterior sections of the right-side main-deck doors moving incorrectly relative to their interior animations.

• FIXED cockpit lighting briefly appearing fully illuminated when transitioning from an exterior view back into the cockpit.

• FIXED unwanted geometry visible from above near door ML5.

• FIXED Panel Text on Belly not parented to FIXED mesh

• FIXED THS missing tab placard

• FIXED Missing Placards on Right Inner Canoe

• FIXED Smoothing Issue Below NG Light

• FIXED Screws need to be Transparent on Nose Cam Light

• FIXED Slats animation improvement, after wing mesh updating there is extra gap on slats and wing, they also clipping with Pylons when fully deployed

• FIXED Emirates A6-EOE new special paint

• FIXED Emirates Arsenal

• FIXED Lufthansa old and new

• FIXED GPU units too low/into the ground

• FIXED Bird strike rendered damaged not match indications

• FIXED Engine fire failed engine 4 but engine 1 showing fire effects

• FIXED LOD: inside of window cabin "frame" disappears

• FIXED Ailerons snap up instantly on landing - no gradual movement into position and back

• FIXED QTR A7-APJ Missing window frames, incorrect color window plugs, sim name missing engine type

• FIXED Lufthansa shouldn't have underwing reg

• FIXED Qatar livery doesn't have its engine type displayed on the menu

• FIXED Wrong aircraft registration on wing of Arsenal Champions livery

• FIXED Virtual copilot avatar is not seated correctly

• FIXED Wings fully flexed downwards after landing

• ADDED Add water service panel as operable panel

• ADDED the two missing GPU outlet cables, bringing the total to four.

EFB/OIT📱

• FIXED the TO PERF cross-check result so AVNCS/OIS DISCREPANCY correctly displays NONE when no discrepancy is present.

• FIXED GSX Profile - Deicing vehicles not reaching above wing level

• FIXED Final loadsheet sends before fueling complete

• FIXED Birdstrike and engine fire should not be activatable at the same time

• FIXED Birdstrike dynamic values wont refresh after disabled/enabled

• FIXED Flight plan generated from EFB gives always wrong Fuel Factor/Bias P06.0

• FIXED Input field wont be captured by physical keyboard when virtual keyboard is off

SOUNDS🔊

• FIXED Cockpit pack sound missing or too low

• FIXED No AP disconnect MW and CRC aural when lost due to failure

• FIXED "100" callout after initiating go around

• FIXED EMER canc still sounds aurals if a cancelled failure activates

• FIXED No warning/CRC when AP disconnect by stick intervention

• FIXED Throttle Calibration - Hide reverse detents on ENG 1 and ENG 4 axis

• ADDED Restart advisory message when changes to calibration made