Modelling & Texturing Latest Topics

Painting iniBuilds A300 MSFS Community Paintkit flap fairings problem.

Sun, 07 Jan 2024 15:17:24 +0000

Hello,
I downloaded the iniBuilds A300 MSFS Community Paintkit, and I painted the end of the flap fairings in red.

However, after finishing it, I noticed that there is a blank space at the end of the flap fairings flat surface (including the antenna).

Could you please help me identify the location of this area in the Wing Master file?

Thank you.

Virtual cockpit geometry; glareshield and viewpoint

Fri, 07 Mar 2025 18:05:48 +0000

Hello ini-Team,

it is not possible to setup the viewpoint that it matches the official documents. Therefore i think there is something wrong with the model of the glareshield. This is especially noticeable in VR.

How it should be

What i observe

EDDF runway width of 07R is 45m, which corresponds to the wingspan of the A300:

Default view:

If the viewpoint is set to see just in front of the center line, the flight mode annunciator on the PFD is not visible:

Is there any chance to get this fixed, as this is an immersion killer and the A300 will stay in the hangar.

There is a nice article about Airbus seat position:

https://safetyfirst.airbus.com/are-you-properly-seated/

Best regards

Stephan

P/B lights brightness too dim

Sun, 19 May 2024 21:43:33 +0000

Hello Team,

from what I recall from my uncounted Flights on the A300/A310 cockpit, the real world pushbutton lights are much brighter than on the INI A300.

Even if I set the lights to BRT, they look still far to dim for me.

Best regards,

Toto

MSFS 2020 Marketplace Customers

Fri, 27 Jun 2025 12:05:12 +0000

This is a 2-part question really.

1- I hear there's a lower texture version available for the A300. How can Marketplace buyers access it?

2- Can Marketplace customers also use the iniManager?

A300-600R Paintkit No Longer Available?

Tue, 11 Mar 2025 14:18:21 +0000

Hi All,

I was wondering if anybody knows where to download the A300-600R paintkit now as it no longer will download instead saying "this file has been deleted or you do not have permission contact the owner" Any help on this would be really appreciated!

A300 Paintkit extraction issues

Sat, 26 Oct 2024 12:51:38 +0000

Hello,

I have downloaded the current Paintkit for the A300. Unfortunately any attempts unzipping the PSD files have failed so far. I tried with multiple software and computers, however the result remains the same.

Can you check if there are any issues or would you have any tips if some special action is needed?

Thanks,

Reto

Missing Radome File on texture

Tue, 04 Feb 2025 01:28:41 +0000

I'm doing a livery for A300-600R PAX GE engine, i have downloaded the paintkit and after painting and setting the files, when i load the aircraft in simulator the Radome on airplane noose is with a pink texture, like is missing something, but when i see other paintings of A300 PAX, all the files are in the folder, same names and same amout of files, i don't know what it can be, if someone could help i appreciate it!

Beacon light bleed through in cabin

Wed, 29 Jan 2025 23:47:16 +0000

The beacon light bleeds through on the GE PAX version in the cabin.

IMG_5508.mp4

Plane's Head looks so strange! Is this modiling error?

Sun, 21 Jul 2024 14:33:28 +0000

Does anyone notice the odd shape of the plane's head? it feels like the size of the body and head is incorrect. It looks like an indentation between the connection of the plane's body and head is this how the plane looks in real life(really doubt it) or is it a modeling error? I have some in-game screenshots VS real life, if it is an error will the inbuilds team fix it??

A300 cockpit registration placard

Mon, 07 Oct 2024 18:58:35 +0000

I've been working on some DHL EAT Leipzig liveries and really would like to change some detail in the cockpit.
For EAT, the standard registration placard is a blank, isntead of it, they use a placard at the lower part of the main panel.

On what texture sheet can I find the placard marked in red? I'd really like to add the registration down there, like EAT has it with their A300s.
I've searched, but it's pretty hard to find it.

Help really appreciated!

BelugaST Airbus A300 600R

Fri, 27 Sep 2024 10:15:02 +0000

I wonder if there will be one if there will be an Airbus A300 600R out over the freight model and also the ST model
BelugaST which is in the X plane if an MSFS2020/MSFS 2024 would come

External Lights not reflecting on ground 1.1.1

Thu, 04 Jul 2024 02:20:37 +0000

Hi everyone! I have a weird bug in which the external lights are not reflecting on the ground. I think this happened after the SU15 but I'm not 100% sure. I asked on the MSFS Discord and someone pointed that "[the lights] are not bright enough for the light to reach", don't know if MS updated something related to that.

Because I wasn't sure this bug was only happening on the A300, I made 2 videos with the exact same graphic settings, scenery, weather and time, comparing the A300 and the Fenix A320.

I tried to change my graphic settings but nothing changed. I also searched on some forums but almost all issues are outdated or talking about a different issue.

Hope you can replicate it and fix it!

🙂

Thanks!

My Specs:

i7-8700K
1070-Ti 8gb
16gb RAM

How can I fix the sealed sticker decal with PW engines?

Sat, 21 Sep 2024 13:45:39 +0000

Hello all,

I try to create a texture for the A300-600 with PW engines. But I noticed on the right engine, there is a security seal decal on it for no purpose. I think that sticker is for the GE engines.

Does anyone know how to fix this issue? Here is my textures profile.

Ram Air Turbine Texture

Thu, 08 Aug 2024 02:39:13 +0000

The texture for the RAT turbine lever is quite low-res:

LANDING GEAR BOGIE TILT

Fri, 26 Jul 2024 05:00:51 +0000

I noticed the landing gear angles are fixed. It must be able to tilt on ground during takeoff rotation and landing.

Expected behaviour

Gear level with aircraft when airborne.

Gear level with the runway when in contact with the runway.

Transitions between the two mentioned above.

The gear will be able to tilt so its aligned with the ground

Texturing flickering on radio stack

Thu, 25 Jul 2024 02:19:22 +0000

When panning around with the camera, these two circled areas exhibit heavy texture flickering.

Nose down look (why did you close the topic?)

Mon, 22 Jul 2024 13:45:40 +0000

That means you are not going to update the nose down look?

You develop new airplanes and you con not correct this............

This is ridiculous.

Nose down look

Sun, 31 Mar 2024 03:50:40 +0000

I know this problem has been reported in a few closed threads before Nose up to high and on discord. But the A300 currently has this issue where it does not have the iconic nose down compression look like the A330 has.

Currently i have tried moving the weights to the nose which causes bad CG but has resulted in not much compresson to the nose gear itself. So i guess this is much tied to a modelling. issue. Also this bug is not present on the xplane release of this product.

Is there any timeline or promise or a small hint that this will be addressed in the future? This is probably the only remaining visual gripe left with this aircraft at the moment.

No cabin lights on exterior view

Sun, 12 May 2024 21:36:34 +0000

Hello Inibuilds.

I have a strange issue with the cabin lights on the exterior view. When i switch from the cockpit camera to the exterior camera the cabin lights are one for 1 seconds and then they go out. I am on XBOX i dont know if pc players also have this issue?.

Black Textures on Doors

Mon, 10 Jun 2024 11:00:04 +0000

I have just fresh installed the A300 for MSFS and 2 Onur Air Liveries all through the iniManager and directly into MSFS Community Folder. But on both liveries I keep getting weird black textures on the doors on the Left Side of the Fuse. Can anyone help me if you have seen this before?

Thanks,

Alex Chard

External Lights Fix?

Mon, 22 Apr 2024 16:37:59 +0000

Hello everyone! Since the A300-600 is already of very high quality, I don't want to mess anything up with mods.
There is an "External Lights Fix" on the well-known add-on website and my question is whether it is really "necessary" to download.
I assume the lights adjusted by the mod are also fixed in the original version? Or will be?

A300 DHL livery xbox

Thu, 16 May 2024 16:56:33 +0000

Hello, the DHL livery on xbox the nose is like gone and the textures are very weird

More missing panel text with IDC enabled

Sat, 01 Jun 2024 21:35:39 +0000

With the latest build, there is missing text on the panels aft of the throttle quadrant when the IDC is enabled. When the IDC is disabled, the text returns.

Attached pictures are from the freighter, haven't checked the passenger variant.

Missing decals for the engine.

Wed, 01 May 2024 12:13:27 +0000

Hello,

I am in the process of making a livery, and while doing so I noticed that in the Ext Placard PSD there are hazard area decals in the engine layer group, however I could never get them to appear, I did some looking in other liveries on this website's downloads section, the only livery I could find that these engine decals would appear in, was the Iran Air EP-IBC.

Can you give me any guidance as to what I am doing wrong?

Many thanks in advance and happy May Day.

VC Geometry in Virtual Reality

Sun, 19 May 2024 13:10:50 +0000

Hi Team,

I´ve noticed that the geometry of the VC seems to be off in someway ( in VR ).

When I align my seat with the red and white balls on the center window column, I´m unable to see the FMA.

In order to make the FMA visible, I have to set my position unrealistally far back or unrealistically low ( when setting the seat so low that I´m able to see the FMA, I wouldn´t be able to reach some parts on the Overhead like Fuel Pumps, Packs, etc. ).

I think the easiest way to fix this is to lower the position of the PFD.

Thank´s for looking into it ( please try in VR ).

Best regards,

Toto